ARDUINO AIRSOFT TIME BOMB GAME

Hello world! Today i made a ARDUINO AIRSOFT TIME BOMB, pretty easy to build. Be creative!


Take a look at the video to see the ARDUINO AIRSOFT TIME BOMB at work.

Schematic:
Arduino airsoft time bomb
Parts list:
Arduino UNO
Potentiometer (+ knob optional)
buzzer
On/Off switch
1 Channel relay
lcd 1602 – Blue Backlight
4×4 Keypad
2x Red leds, 1x green led.
2x 220 Ohm (220 R) resistors
A set of MM FF MF Jumper wires
Female Power jack & adapter (optional) (You can also add batterys of course)
2 buttons for C & D(optional)
1 button for reset (optional)
Alarm Strobe? Alarm Sound?

(i used male and female audio plugs to connect the lamp)

The code in this ARDUINO AIRSOFT TIME BOMB has multiple tabs. So you need to add each code to a NEW tab.

Code: (Name it “Airsoft time bomb”.)

#include <Wire.h> 
#include <Keypad.h>
//#include <LiquidCrystal_I2C.h>
#include <LiquidCrystal.h>
//ARDUINO AIRSOFT TIME BOMB.
//LiquidCrystal_I2C lcd(0x38,16,2);
LiquidCrystal lcd(7, 6, 5, 4, 3, 2);
const byte ROWS = 4; //four rows
const byte COLS = 4; //three columns
char keys[ROWS][COLS] = {
  {'1','2','3','a'}
  ,
  {'4','5','6','b'}
  ,
  {'7','8','9','c'}
  ,
  {'*','0','#','d'}
};

byte rowPins[ROWS] = {
  12, 13, A5, A4}; //connect to the row pinouts of the keypad
byte colPins[COLS] = {
  A3, A2, A1, A0
}; //connect to the column pinouts of the keypad

Keypad keypad = Keypad( makeKeymap(keys), rowPins, colPins, ROWS, COLS );

char codeInput[8];
byte time[4];
boolean refresh=true;//1 refresh one time...
char password[8];
int key=-1;
char lastKey;
char var;
boolean passwordEnable=false;

//Buttons for lcd shield
char BT_RIGHT = '4';
char BT_UP = 'a';
char BT_DOWN = 'b';
char BT_LEFT = '6';
char BT_SEL = 'd';   // Ok key  
char BT_CANCEL = 'c';
char BT_DEFUSER = 'x';   // not implemented

//leds

const int REDLED = 11;
const int GREENLED = 10;
//const int BLUELED = 12;
//RELAYPIN
boolean relayEnable = false;
const int RELAYPIN = 9;
//IS VERY IMPORTANT THAT YOU TEST THIS TIME. BY DEFAULT IS IN 1 SEC. THAT IS NOT TOO MUCH. SO TEST IT!
const int RELAY_TIME = 5000;

//TIME INTS
int GAMEHOURS = 0;
int GAMEMINUTES = 45;
int BOMBMINUTES = 4;
int ACTIVATESECONDS = 5;

boolean endGame = false;

boolean sdStatus = false; //search and destroy game enable used in config
boolean saStatus = false; //same but SAbotaghe
boolean doStatus = false; //for DEmolition
boolean start = true;
boolean defusing;
boolean cancelando;
// SOUND TONES
boolean soundEnable = true;
int tonepin = 8; // Pin 13 for the sound
int alarmTone1 = 700;
int alarmTone2 = 2600;
int activeTone = 1330;
int errorTone = 100;

unsigned long iTime;
unsigned long timeCalcVar;
unsigned long redTime;
unsigned long greenTime;
unsigned long iZoneTime;//initial time for zone
byte team=0; // 0 = neutral, 1 = green team, 2 = red team

void setup(){
  lcd.begin(16, 2);
  Serial.begin(9600);
  lcd.setCursor(3,0);
  tone(tonepin,2400,30);
  lcd.print("BLUECORE TECH");// you can add your team name or someting cool
  lcd.setCursor(0,1);
  lcd.print(" AIRSOFT BOMB");// you can add your team name or someting cool
  keypad.setHoldTime(50);
  keypad.setDebounceTime(50);
  keypad.addEventListener(keypadEvent);

  //PinModes
  pinMode(GREENLED, OUTPUT);     
  pinMode(REDLED, OUTPUT); 
  pinMode(RELAYPIN, OUTPUT);  
  // CONFIGURE THE BARS OF PROGRESS BAR
  byte bar1[8] = {
    B10000,
    B10000,
    B10000,
    B10000,
    B10000,
    B10000,
    B10000,
    B10000,
  };
  byte bar2[8] = {
    B11000,
    B11000,
    B11000,
    B11000,
    B11000,
    B11000,
    B11000,
    B11000,
  };
  byte bar3[8] = {
    B11100,
    B11100,
    B11100,
    B11100,
    B11100,
    B11100,
    B11100,
    B11100,
  };
  byte bar4[8] = {
    B11110,
    B11110,
    B11110,
    B11110,
    B11110,
    B11110,
    B11110,
    B11110,
  };
  byte bar5[8] = {
    B11111,
    B11111,
    B11111,
    B11111,
    B11111,
    B11111,
    B11111,
    B11111,
  };
  byte up[8] = {
    B00000,
    B00100,
    B01110,
    B11111,
    B11111,
    B00000,
    B00000,
  };

  byte down[8] = {
    B00000,
    B00000,
    B11111,
    B11111,
    B01110,
    B00100,
    B00000,
  };
  lcd.createChar(0,bar1);
  lcd.createChar(1,bar2);
  lcd.createChar(2,bar3);
  lcd.createChar(3,bar4);
  lcd.createChar(4,bar5);
  lcd.createChar(5,up);
  lcd.createChar(6,down);
}

void loop(){
  menuPrincipal();
}
void keypadEvent(KeypadEvent key){
  switch (keypad.getState()){
    case RELEASED:
      switch (key){
         case 'd': defusing=false;
         break;
         case 'c': cancelando=false;
         break;
      }
    break;
    case HOLD:
      switch (key){
        case 'd': defusing= true;
        break;
        case 'c': cancelando=true;
        break;
      }
    break;
  }
}

Code part 2: (Name it “Domination”.)

void domination(){

  //SETUP INITIAL TIME 
  int minutos = GAMEMINUTES-1;
  boolean showGameTime=true;
  unsigned long a;
  unsigned long iTime=millis(); //  initialTime in millisec 
  unsigned long aTime;
 
  team=0;
  iZoneTime=0;
  aTime=0;
  redTime=0;
  greenTime=0;

  int largoTono = 50;
  // 0 = neutral, 1 = green team, 2 = red team
  a=millis();
  //Starting Game Code
  while(1)  // this is the important code, is a little messy but works good.
  {
    if(endGame){
      gameOver();
    }
    
    keypad.getKey();
    aTime=millis()- iTime;
    //Code for led blinking
    timeCalcVar=(millis()- iTime)%1000;
    if(timeCalcVar >= 0 && timeCalcVar <= 40)
    {
      if(team==1)digitalWrite(GREENLED, HIGH);  
      if(team==2)digitalWrite(REDLED, HIGH);  
    }
    if(timeCalcVar >= 50 && timeCalcVar <= 100)
    {    
      if(team==1)digitalWrite(GREENLED, LOW);  
      if(team==2)digitalWrite(REDLED, LOW);
    }
    // Sound!!! same as Destroy 
    if(timeCalcVar >= 0 && timeCalcVar <= 40 && soundEnable)tone(tonepin,activeTone,largoTono);

    if(timeCalcVar >= 245 && timeCalcVar <= 255 && minutos-aTime/60000<2 && soundEnable)tone(tonepin,activeTone,largoTono);
    if(timeCalcVar >= 495 && timeCalcVar <= 510 && minutos-aTime/60000<4 && soundEnable)tone(tonepin,activeTone,largoTono);
    if(timeCalcVar >= 745 && timeCalcVar <= 760 && minutos-aTime/60000<2 && soundEnable)tone(tonepin,activeTone,largoTono);
    //Help to count 3 secs
    if(a+2000<millis()){
      a=millis();   
      showGameTime=!showGameTime;
      cls();
    }
    //THE NEXT TO METHODS SHOW "GAME TIME" AND "CONTROLED ZONE TIME" IT SHOWS 2 AND 2 SEC EACH

    if(showGameTime){ //THE SECOND IS /2
      lcd.setCursor(3,0);
      lcd.print("GAME TIME");
      lcd.setCursor(3,1);
      printTime(minutos, aTime);
    }
    else if (!showGameTime){

      lcd.setCursor(2,0);
      if(team == 0)lcd.print("NEUTRAL ZONE");
      if(team == 1)lcd.print(" GREEN ZONE");
      if(team == 2)lcd.print("  RED ZONE");

      if(team>0){
        lcd.setCursor(3,1);
        printTimeDom(millis()-iZoneTime,true);
      }
    }

    //###########################CHECKINGS##################

    //Check If Game End
    if(minutos-aTime/60000==0 && 59-((aTime/1000)%60)==0)
    {
      gameOver();
    }

    //Check If IS neutral
    while((defusing || cancelando) && team > 0)
    {
      cls();
      if(team>0)lcd.print("NEUTRALIZING...");
      lcd.setCursor(0,1);
      unsigned int percent=0;
      unsigned long xTime=millis(); //start disabling time
      while(defusing || cancelando)
      {
        //check if game time runs out during the disabling
        aTime= millis()- iTime;
        if((minutos-aTime/60000==0 && 59-((aTime/1000)%60)==0) || minutos-aTime/60000>4000000000){ 
          endGame = true;
        }
        
        keypad.getKey();
        timeCalcVar = (millis()- xTime)%1000;

        if( timeCalcVar >= 0 && timeCalcVar <= 20)
        {
          if(soundEnable)tone(tonepin,alarmTone1,200);
        }
        if(timeCalcVar >= 480 && timeCalcVar <= 500)
        {
          if(soundEnable)tone(tonepin,alarmTone2,200);
          digitalWrite(REDLED, LOW);
        }

        unsigned long seconds= millis() - xTime;
        percent = (seconds)/(ACTIVATESECONDS*10);
        drawBar(percent);

        if(percent >= 100)
        {
          delay(1000);

          if(team==1){ 
            greenTime+=millis()-iZoneTime;
            iZoneTime=0; 

          }
          if(team==2){ 
            redTime+=millis()-iZoneTime;
            iZoneTime=0; 
          }
          team=0;
          break;
        }
      }
      cls();
    }

    //Capturing red

    while(defusing && team == 0 )
    {
      cls();
      if(team==0)lcd.print(" CAPTURING ZONE");
      lcd.setCursor(0,1);
      unsigned int percent=0;
      unsigned long xTime=millis(); //start disabling time
      while(defusing)
      {
        keypad.getKey();
        //check if game time runs out during the disabling
        aTime= millis()- iTime;
        if((minutos-aTime/60000==0 && 59-((aTime/1000)%60)==0) || minutos-aTime/60000>4000000000){ 
          endGame = true;
        }
        timeCalcVar = (millis()- xTime)%1000;

        if( timeCalcVar >= 0 && timeCalcVar <= 20)
        {
          digitalWrite(REDLED, HIGH);  
          if(soundEnable)tone(tonepin,alarmTone1,200);
        }
        if(timeCalcVar >= 480 && timeCalcVar <= 500)
        {
          if(soundEnable)tone(tonepin,alarmTone2,200);
          digitalWrite(REDLED, LOW);
        }

        unsigned long seconds= millis() - xTime;
        percent = (seconds)/(ACTIVATESECONDS*10);
        drawBar(percent);

        if(percent >= 100)
        {
          digitalWrite(GREENLED, LOW);
          team=2;
          iZoneTime=millis();
          delay(1000);
          break;
        }
      }
      cls();
      digitalWrite(REDLED, LOW);
    }

    //getting to green zone
    while(cancelando && team == 0 )
    {
      cls();
      if(team==0)lcd.print(" CAPTURING ZONE");
      lcd.setCursor(0,1);
      unsigned int percent=0;
      unsigned long xTime=millis(); //start disabling time
      while(cancelando)
      {
        keypad.getKey();
        //check if game time runs out during the disabling
        aTime= millis()- iTime;
        if((minutos-aTime/60000==0 && 59-((aTime/1000)%60)==0) || minutos-aTime/60000>4000000000){ 
          endGame = true;
        }
        timeCalcVar = (millis()- xTime)%1000;

        if( timeCalcVar >= 0 && timeCalcVar <= 20)
        {
          digitalWrite(GREENLED, HIGH);  
          if(soundEnable)tone(tonepin,alarmTone1,200);
        }
        if(timeCalcVar >= 480 && timeCalcVar <= 500)
        {
          if(soundEnable)tone(tonepin,alarmTone2,200);
          digitalWrite(GREENLED, LOW);
        }

        unsigned long seconds= millis() - xTime;
        percent = (seconds)/(ACTIVATESECONDS*10);
        drawBar(percent);

        if(percent >= 100)
        {
          digitalWrite(GREENLED, LOW);
          team=1;
          iZoneTime=millis();
          delay(1000);
          break;
        }
      }
      cls();
      digitalWrite(GREENLED, LOW);  
    }
  }
}

void gameOver(){

  if(team==1)greenTime+=millis()-iZoneTime;
  if(team==2)redTime+=millis()-iZoneTime;
  digitalWrite(GREENLED, LOW);
  digitalWrite(REDLED, LOW);
  while(!defusing){
    keypad.getKey();
    if(defusing){
      keypad.getKey();
      break;
    }
    lcd.clear();
    lcd.setCursor(3,0);
    lcd.print("TIME OVER!");
    lcd.setCursor(0,1);

    //check who team win the base
    if(greenTime>redTime){
      //greenteam wins
      lcd.print(" GREEN TEAM WINS");
      digitalWrite(GREENLED, HIGH);
    }
    else{
      //redteam wins 
      lcd.print("  RED TEAM WINS");
      digitalWrite(REDLED, HIGH);
    }
    delay(3000);
    keypad.getKey();
    if(defusing){
      keypad.getKey();
      break;
    }
    cls();
    lcd.print("Red Time:");
    lcd.setCursor(5,1);
    printTimeDom(redTime,false);
    delay(3000);
    keypad.getKey();
    if(defusing){
      
      break;
    }
    cls();
    lcd.print("Green Time:");
    lcd.setCursor(5,1);
    printTimeDom(greenTime,false);
    delay(3000);
    keypad.getKey();
    if(defusing){
      keypad.getKey();
      break;
    }
  }
  cls();
  delay(100);
  lcd.print("Play Again?");
  lcd.setCursor(0,1);
  lcd.print("A : Yes B : No");
  while(1)
  {
    var = keypad.waitForKey();
    if(var == 'a' ){
      tone(tonepin,2400,30);
      cls();
      domination();
      break;
    }  
    if(var == 'b' ){
      tone(tonepin,2400,30);
      menuPrincipal();
      break;
    }  
  } 
}

Code part 3: (Name it “Keys”.)

//This fuction compare codeInput[8] and password[8] variables
boolean comparePassword(){

  for(int i=0;i<8;i++){
    if(codeInput[i]!=password[i])return false;
  }
  return true;
}

//Set the password variable
void setCode(){

  lcd.setCursor(0, 1);
  for(int i=0;i<8;i++){
    while(1){
      var= getNumber();
      if(var !='x'){
        codeInput[i] = var;

        if (i != 0){
          lcd.setCursor(i-1,1);
          lcd.print("*");
          lcd.print(var);
        }
        else
        {
          lcd.print(var);
        }
        tone(tonepin,2400,30);
        break;
      }
    }
  }
}
void setCodeTime(){

  timeCalcVar=millis();

  for(int i=0;i<8;i++){
    while(1){
      if(ACTIVATESECONDS*1000+timeCalcVar-millis()<=100){
        codeInput[i]='x';
        break;
      }

      lcd.setCursor(11,0);
      printTimeDom(ACTIVATESECONDS*1000+timeCalcVar-millis(),false);

      var= getNumber();
      if(var !='x'){
        codeInput[i] = var;

        if (i != 0){
          lcd.setCursor(i-1,1);
          lcd.print("*");
          lcd.print(var);
        }
        else
        {
          lcd.print(var);
        }
        tone(tonepin,2400,30);
        break;
      }
    }
  }
}
void setPass(){
  lcd.setCursor(0, 1);

  for(int i=0;i<8;i++){ 
    while(1){
      var= getNumber();
      if(var !='x'){
        password[i] =  var;
        if (i != 0){
          lcd.setCursor(i-1,1);
          lcd.print("*");
          lcd.print(var);
        }
        else
        {
          lcd.print(var);
        }
        tone(tonepin,2400,30);
        break;
      }
    }  
  }
}

void setNewPass(){

  while(1){
    lcd.clear();
    lcd.setCursor(0, 0);
    lcd.print("Enter New Pass");
    setPass();

    lcd.clear();
    lcd.setCursor(0, 0);
    lcd.print("Retype Pass");

    setCode();

    if(comparePassword()){

      lcd.clear();
      lcd.setCursor(0, 0);
      lcd.print("Password Set OK!");
      delay(2000); 
      break; 
    }
    else {
      lcd.clear();
      lcd.setCursor(0, 0);
      lcd.print("ERROR Dont Match!");
      if(soundEnable)tone(tonepin,errorTone,200);
      delay(2000); 

    }
  }
}
//Whait until a button is pressed is is a number return the number 'char' if not return x



char getNumber(){
  while(1){
    var = keypad.getKey();
    if (var){//
      switch (var) {
      case 'a': 
        return 'x';
        break;
      case 'b': 
        return 'x';
        break;

      case 'c': 
        return 'x';
        break;
      case 'd': 
        return 'x';
        break;
      case '*': 
        return 'x';
        break;
      case '#': 
        return 'x';
        break;
      default:
        return var;
        break;
      }
    }
    return 'x';
  }
}

byte getRealNumber(){

  while(1){
    var = keypad.waitForKey();

    if (var){//
      switch (var) {
      case '1': 
        return 1;
        break;
      case '2': 
        return 2;
        break;

      case '3': 
        return 3;
        break;
      case '4': 
        return 4;
        break;
      case '5': 
        return 5;
        break;
      case '6': 
        return 6;
      case '7': 
        return 7;
        break;
      case '8': 
        return 8;
        break;
      case '9': 
        return 9;
        break;
        case '0': 
        return 0;
        break;
        
      default:
        return 11;
        break;
      }

    }
    return 11;
  }
}

Code part 4: (Name it “Lang”.)

  char* menu1[]={"Search&Destroy","Sabotage","Domination", "Configuration"      };
  char* menu2[]={"Game Config","Sound Config", "Relay Test", "Auto Test"      };   
  char* GAME_TIME="Game Time:";
  char* BOMB_TIME="Bomb Time:";
  char* ZERO_MINUTES="00 minutes";
  char* ARM_TIME="Arm Time:";
  char* ZERO_SECS="00 seconds";
  char* ENABLE_SOUND="Enable Sound?";
  char* YES_OR_NOT="A : Yes B : No";
  char* ENABLE_RELAYPIN="Enable Relay?";
  char* ENABLE_CODE="Enable Code Arm?";
  char* GAME_TIME_TOP="GAME TIME";
  char* ARMING_BOMB = "ARMING BOMB";
  char* ENTER_CODE = "Enter Code";
  char* CODE_ERROR = "Code Error!";
  char* BOMB_ARMED = "BOMB ARMED";
  char* DETONATION_IN = "DETONATION IN";
  char* DISARMING = "DISARMING BOMB" ;
  char* DISARM = "DISARMING";
  char* GAME_OVER = " GAME OVER! ";
  char* DEFENDERS_WIN = " DEFENDERS WIN ";
  char* SABOTAGE_FAIL= "SABOTAGE FAIL!";
                   
  

Code part 5: (Name it “Memory”.) this code is commented by default.

//void getConfig(){
//
////Check first time 
//
//if (EEPROM.read(0)!= 1){
////write default config values
//
//
//
//}
//  
////RELAY_TIME = EEPROM.read(1) * 1000 ;
//
//  
//}

Code part 6: (Name it “Menu”.)

//##################MENUS###############################

void menuPrincipal(){   //MAIN MENU

  digitalWrite(GREENLED, LOW); 
  digitalWrite(REDLED, LOW); 

  //   if whe start a new game from another we need to restart propertly this variables
  saStatus=false;
  sdStatus=false;
  doStatus=false;
  //Draw menu
  cls();//clear lcd and set cursor to 0,0
  int i=0;
 // HERE YOU CAN ADD MORE ITEMS ON THE MAIN MENU
  lcd.print(menu1[i]);
  lcd.setCursor(15,1);
  checkArrows(i,2);
  while(1){

    var = keypad.waitForKey();
    if(var == BT_UP && i>0){
      tone(tonepin,2400,30);
      i--;
      cls();
      lcd.print(menu1[i]);
      checkArrows(i,2);
      delay(50);
    }
    if(var == BT_DOWN && i<2){
      tone(tonepin,2400,30);
      i++;
      cls(); 
      lcd.print(menu1[i]);    
      checkArrows(i,2);
      delay(50);
    }

    if(var == BT_SEL){
      tone(tonepin,2400,30);
      cls();
      switch (i){

      case 0:
        sdStatus=true;
        configQuickGame();
        startGameCount();
        search();
        break;
      case 1: 
        saStatus=true;
        configQuickGame();
        startGameCount();
        sabotage();
        break;
      case 2:

        doStatus=true;
        configQuickGame();
        startGameCount();
        domination();
        break;
      case 3:
        config();
        break;

      }
    }
  }
}

void config(){
  //Draw menu
  lcd.clear();
  lcd.setCursor(0, 0);
  int i=0;
  
  delay(500);
  lcd.print(menu2[i]);
  checkArrows(i,3);

  while(1){
    var=keypad.waitForKey();
    if(var == BT_UP && i>0){
      tone(tonepin,2400,30);
      i--;
      lcd.clear();  
      lcd.print(menu2[i]);
      checkArrows(i,3);
      delay(50);

    }
    if(var == BT_DOWN && i<3){
      tone(tonepin,2400,30);
      i++;
      lcd.clear();  
      lcd.print(menu2[i]);
      checkArrows(i,3);
      delay(50);
    }
    if(var == BT_CANCEL){
      tone(tonepin,2400,30);
      menuPrincipal();
    }
    if(var == BT_SEL){
      tone(tonepin,2400,30);
      lcd.clear();
      switch (i){

      case 0:
        //gameConfigMenu();
        break;

      case 1:
        //soundConfigMenu();
        break;

      case 2:
        cls();
        lcd.print("RELAYPIN ON!");
        digitalWrite(RELAYPIN, HIGH);   // turn the LED on (HIGH is the voltage level)
        delay(4000);   // wait for 4 second
        cls();
        lcd.print("RELAYPIN OFF!");
        digitalWrite(RELAYPIN, LOW);
        delay(2000);
        config();
        break;        

      }
    }
  }
}

void configQuickGame(){

  cls();
  //GAME TIME
  if(sdStatus || doStatus || saStatus){
    menu1:
    cls();
    lcd.print(GAME_TIME);
    delay(100);
    lcd.setCursor(0,1);
    lcd.print("00:00 hh:mm");
    lcd.cursor();
    lcd.blink();
    lcd.setCursor(0,1);
    byte var2=0;
    for(int i=0;i<4;i++){ 
      while(1){
        if(i==2 && var2==0){
          lcd.print(":");
          var2=1;
        }

        byte varu= getRealNumber();
        if(varu !=11){

          time[i] =  varu;
          Serial.print(varu);


          lcd.print(varu);
          tone(tonepin,2400,30);

          break;
        }
      }  
    }
    lcd.noCursor();
    lcd.noBlink();
    lcd.setCursor(13,1);
    lcd.print("ok?");
    //zona donde pasamos los items a
    //redibujar
    while(1){
      var = keypad.waitForKey();
      if(var == 'd') // Accept
      {
        tone(tonepin,2400,30);
        GAMEMINUTES= ((time[0]*600)+(time[1]*60)+(time[2]*10)+(time[3]));
        break;
      }    
  if(var == 'c') // Cancel or Back Button :')
      {
        tone(tonepin,2400,30);
        goto menu1;
      }           
    }
    tone(tonepin,2400,30);
    cls();
  }
  //BOMB TIME
  if(sdStatus || saStatus){
 
    menu2:
    cls();
    lcd.print(BOMB_TIME);
    delay(100);
    lcd.setCursor(0,1);
    lcd.print(ZERO_MINUTES);
    lcd.cursor();
    lcd.blink();
    lcd.setCursor(0,1);
    for(int i=0;i<2;i++){ 
      while(1){
        byte varu= getRealNumber();
        if(varu !=11){
          time[i] =  varu;
          lcd.print(varu);
          tone(tonepin,2400,30);
          break;
        }
      }  
    }
    lcd.noCursor();
    lcd.noBlink();   
    lcd.setCursor(13,1);
    lcd.print("ok?");
    //zona donde pasamos los items a
    //redibujar
    while(1){
      var = keypad.waitForKey();
      if(var == 'd') //
      {
        tone(tonepin,2400,30);
        BOMBMINUTES= ((time[0]*10)+(time[1]));
        break;
      }    
  if(var == 'c') // Cancel or Back Button :')
      {
        tone(tonepin,2400,30);
        goto menu2;
      }           
    }
    tone(tonepin,2400,30);
    cls();
  }
  cls();
  //ARMING TIME
  if(sdStatus || doStatus || saStatus){
        
    menu3:
    cls();
    lcd.print(ARM_TIME);
    delay(100);
    lcd.setCursor(0,1);
    lcd.print(ZERO_SECS);
    lcd.cursor();
    lcd.blink();
    lcd.setCursor(0,1);
    for(int i=0;i<2;i++){ 
      while(1){
        byte varu= getRealNumber();
        if(varu !=11){
          time[i] =  varu;
          lcd.print(varu);
          tone(tonepin,2400,30);
          break;
        }
      }  
    }
    lcd.noCursor();
    lcd.noBlink(); 
    lcd.setCursor(13,1);
    lcd.print("ok?");  
    
    //zona donde pasamos los items a
    //redibujar
    while(1){
      var = keypad.waitForKey();
      if(var == 'd') // Accept
      {
        tone(tonepin,2400,30);
        ACTIVATESECONDS= ((time[0]*10)+(time[1]));
        break;
      }    
  if(var == 'c') // Cancel or Back Button :')
      {
        tone(tonepin,2400,30);
        goto menu3;
      }           
    }
    tone(tonepin,2400,30);
    cls();
  }
  //sound??
  if(sdStatus || saStatus || doStatus){
    cls();
    lcd.print(ENABLE_SOUND);
    lcd.setCursor(0,1);
    lcd.print(YES_OR_NOT);

    while(1)
    {
      var = keypad.waitForKey();
      if(var == 'a' ){
        soundEnable=true;
        tone(tonepin,2400,30);
        break;
      }  

      if(var == 'b' ){
        soundEnable=false;
        tone(tonepin,2400,30);
        break;
      }  
    }
  } 
  //Activate RELAY at Terrorist game ends??? Boom!

  if(sdStatus || saStatus){
    cls();
    lcd.print(ENABLE_RELAYPIN);
    lcd.setCursor(0,1);
    lcd.print(YES_OR_NOT);
    while(1)
    {
      var = keypad.waitForKey();
      if(var == 'a' ){
        relayEnable=true;
        tone(tonepin,2400,30);
        break;
      }  
      if(var == 'b' ){
        relayEnable=false;
        tone(tonepin,2400,30);
        break;
      }  
    } 
  }
  //You Want a password enable-disable game?
  if(sdStatus || saStatus){
    cls();
    lcd.print(ENABLE_CODE);
    lcd.setCursor(0,1);
    lcd.print(YES_OR_NOT);

    while(1)
    {
      var = keypad.waitForKey();
      if(var == 'a' ){
        tone(tonepin,2400,30);
        setNewPass();
        passwordEnable = true;
        break;
      }  
      if(var == 'b' ){
        tone(tonepin,2400,30);
        passwordEnable = false;
        break;
      }  
    } 
    tone(tonepin,2400,30);
  }  
  //Continue the game :D
}

Code part 7: (Name it “Sabotage”.)

void sabotage() {
  endGame = false;
  refresh = true;
  cls();
  digitalWrite(REDLED, LOW);
  digitalWrite(GREENLED, LOW);
  //SETUP INITIAL TIME
  int minutos = GAMEMINUTES - 1;


  if (start) {
    iTime = millis(); //  initialTime of the game, use this because sabotage mode goes can return to sabotage()
    start = false;
  }

  unsigned long aTime;

  //Starting Game Code
  while (1) { // this is the important code, is a little messy but works good.

    if (endGame) {
      failSplash();
    }
    //Code for led blinking
    timeCalcVar = (millis() - iTime) % 1000;
    if (timeCalcVar >= 0 && timeCalcVar <= 50)digitalWrite(GREENLED, HIGH);
    if (timeCalcVar >= 90 && timeCalcVar <= 130)digitalWrite(GREENLED, LOW);

    lcd.setCursor(3, 0);
    lcd.print(GAME_TIME);
    aTime = millis() - iTime;
    lcd.setCursor(3, 1);

    //PRINT TIME ON LCD
    printTime(minutos, aTime);
    //###########################CHECKINGS##################

    //Check If Game End
    if (minutos - aTime / 60000 == 0 && 59 - ((aTime / 1000) % 60) == 0) {
      failSplash();
    }

    //USED IN PASSWORD GAME
    if ('d' == keypad.getKey() && passwordEnable) {
      lcd.clear();
      lcd.setCursor(2, 0);
      lcd.print(ARMING_BOMB);
      delay(1000);//a little delay to think in the password
      lcd.clear();
      lcd.setCursor(0, 0);
      lcd.print(ENTER_CODE);

      setCodeTime();// we need to set the compare variable first

      //then compare :D

      if (comparePassword()) {
        destroySabotage();
      }
      lcd.clear();
      lcd.setCursor(2, 0);
      lcd.print(CODE_ERROR);
      if (soundEnable)tone(tonepin, errorTone, 200);
      delay(500);
      cls();
    }

    //Check If Is Activating
    while (defusing && !passwordEnable)
    {
      keypad.getKey();
      cls();
      digitalWrite(GREENLED, LOW);
      lcd.clear();
      lcd.setCursor(2, 0);
      lcd.print(ARMING_BOMB);
      lcd.setCursor(0, 1);
      unsigned int percent = 0;
      unsigned long xTime = millis(); //start disabling time
      while (defusing)
      {
        keypad.getKey();
        //check if game time runs out during the disabling
        aTime = millis() - iTime;
        if ((minutos - aTime / 60000 == 0 && 59 - ((aTime / 1000) % 60) == 0) || minutos - aTime / 60000 > 4000000000)endGame = true;

        timeCalcVar = (millis() - xTime) % 1000;

        if ( timeCalcVar >= 0 && timeCalcVar <= 40)
        {
          digitalWrite(REDLED, HIGH);
          if (soundEnable)tone(tonepin, alarmTone1, 200);
        }
        if (timeCalcVar >= 480 && timeCalcVar <= 520)
        {
          if (soundEnable)tone(tonepin, alarmTone2, 200);
          digitalWrite(REDLED, LOW);
        }
        unsigned long seconds = millis() - xTime;
        percent = (seconds) / (ACTIVATESECONDS * 10);
        drawBar(percent);

        if (percent >= 100)
        {
          digitalWrite(GREENLED, LOW);
          destroySabotage();// jump to the next gamemode
        }
      }
      cls();
      digitalWrite(REDLED, LOW);
    }
  }
}

void destroySabotage() {
  endGame = false;
  lcd.clear();
  lcd.setCursor(3, 0);
  lcd.print(BOMB_ARMED);
  delay(1000);
  int minutos = BOMBMINUTES - 1;
  unsigned long iTime = millis();
  unsigned long aTime;
  int largoTono = 50;

  //MAIN LOOP
  while (1) {

    //If you fail disarm.
    if (endGame) {
      explodeSplash();
    }

    //Led Blink

    timeCalcVar = (millis() - iTime) % 1000;
    if (timeCalcVar >= 0 && timeCalcVar <= 40)
    {
      digitalWrite(REDLED, HIGH);
      if (soundEnable)tone(tonepin, activeTone, largoTono);
    }
    if (timeCalcVar >= 180 && timeCalcVar <= 220) {
      digitalWrite(REDLED, LOW);
    }
    //Sound

    timeCalcVar = (millis() - iTime) % 1000;
    aTime = millis() - iTime;
    if (timeCalcVar >= 245 && timeCalcVar <= 255 && minutos - aTime / 60000 < 2 && soundEnable)tone(tonepin, activeTone, largoTono);
    if (timeCalcVar >= 495 && timeCalcVar <= 510 && minutos - aTime / 60000 < 4 && soundEnable)tone(tonepin, activeTone, largoTono);
    if (timeCalcVar >= 745 && timeCalcVar <= 760 && minutos - aTime / 60000 < 2 && soundEnable)tone(tonepin, activeTone, largoTono);
    if ( minutos - aTime / 60000 == 0 && 59 - ((aTime / 1000) % 60) < 10)largoTono = 300;

    lcd.setCursor(1, 0);
    lcd.print(DETONATION_IN);
    //Passed Time

    lcd.setCursor(3, 1);

    ////////HERE ARE THE TWO OPTIONS THAT ENDS THE GAME///////////

    ////TIME PASED AWAY AND THE BOMB EXPLODES
    if (minutos - aTime / 60000 == 0 && 59 - ((aTime / 1000) % 60) == 0) // Check if game ends
    {
      failSplash();
    }
    //print time
    printTime(minutos, aTime);

    //// SECOND OPTION: YOU PRESS DISARMING BUTTON

    //IF IS A PASSWORD GAME

    if ('d' == keypad.getKey() && passwordEnable) {

      cls();
      digitalWrite(REDLED, LOW);
      digitalWrite(GREENLED, HIGH);
      lcd.print(DISARMING);
      delay(1000);//a little delay to think in the password

      lcd.clear();
      lcd.setCursor(0, 0);
      lcd.print(ENTER_CODE);

      setCodeTime();// we need to set the compare variable first

      //then compare :D

      if (comparePassword()) {
        sabotage();
      }
      lcd.clear();
      lcd.setCursor(2, 0);
      lcd.print(CODE_ERROR);
      if (soundEnable)tone(tonepin, errorTone, 200);
      delay(500);
      cls();
    }

    if (defusing && !passwordEnable) // disarming bomb
    {
      lcd.clear();
      digitalWrite(REDLED, LOW);
      lcd.setCursor(3, 0);
      lcd.print(DISARM);
      lcd.setCursor(0, 1);
      unsigned int percent = 0;
      unsigned long xTime = millis();
      while (defusing)
      {
        keypad.getKey();
        //check if game time runs out during the disabling
        aTime = millis() - iTime;
        if ((minutos - aTime / 60000 == 0 && 59 - ((aTime / 1000) % 60) == 0) || minutos - aTime / 60000 > 4000000000) {
          endGame = true;
        }

        timeCalcVar = (millis() - xTime) % 1000;
        if (timeCalcVar >= 0 && timeCalcVar <= 20)
        {
          digitalWrite(GREENLED, HIGH);
          if (soundEnable)tone(tonepin, alarmTone1, 200);
        }
        if (timeCalcVar >= 480 && timeCalcVar <= 500)
        {
          if (soundEnable)tone(tonepin, alarmTone2, 200);
          digitalWrite(GREENLED, LOW);
        }
        unsigned long seconds = (millis() - xTime);
        percent = seconds / (ACTIVATESECONDS * 10);
        drawBar(percent);

        //BOMB DISARMED RETURN TO SABOTAGE
        if (percent >= 100)
        {
          cls();
          lcd.print("Bomb Disarmed");
          delay(1000);
          sabotage();
        }
      }
      digitalWrite(REDLED, LOW);
      digitalWrite(GREENLED, LOW);
      cls();
    }
  }
}

Code part 8: (Name it “Search and destroy”.)

void search() {
  refresh = true;
  cls();
  digitalWrite(REDLED, LOW);
  digitalWrite(GREENLED, LOW);
  //SETUP INITIAL TIME
  int minutos = GAMEMINUTES - 1;
  unsigned long iTime = millis(); //  initialTime in millisec
  unsigned long aTime;
  //var='o';

  //Starting Game Code
  while (1) { // this is the important code, is a little messy but works good.

    //If you fail disarm.
    if (endGame) {
      failSplash();
    }

    //Code for led blinking
    timeCalcVar = (millis() - iTime) % 1000;
    if (timeCalcVar >= 0 && timeCalcVar <= 50)digitalWrite(GREENLED, HIGH);
    if (timeCalcVar >= 90 && timeCalcVar <= 130)digitalWrite(GREENLED, LOW);

    lcd.setCursor(3, 0);
    lcd.print(GAME_TIME_TOP);
    aTime = millis() - iTime;
    lcd.setCursor(3, 1);

    //PRINT TIME ON LCD

    printTime(minutos, aTime);

    //###########################CHECKINGS##################

    //Check If Game End
    if (minutos - aTime / 60000 == 0 && 59 - ((aTime / 1000) % 60) == 0)failSplash();
    //Serial.println(keypad.getKey());
    //USED IN PASSWORD GAME
    if ('d' == keypad.getKey() && passwordEnable) {
      lcd.clear();
      lcd.setCursor(2, 0);
      lcd.print(ARMING_BOMB);
      delay(1000);//a little delay to think in the password
      lcd.clear();
      lcd.setCursor(0, 0);
      lcd.print(ENTER_CODE);

      setCodeTime();// we need to set the comparation variable first it writes on codeInput[]

      //then compare :D

      if (comparePassword()) destroy();
      lcd.clear();
      lcd.setCursor(3, 0);
      lcd.print(CODE_ERROR);
      if (soundEnable)tone(tonepin, errorTone, 200);
      delay(500);
      cls();
    }
    //Check If Is Activating
    while (defusing && !passwordEnable)
    {
      digitalWrite(GREENLED, LOW);
      lcd.clear();
      lcd.setCursor(2, 0);
      lcd.print(ARMING_BOMB);
      lcd.setCursor(0, 1);
      unsigned int percent = 0;
      unsigned long xTime = millis(); //start disabling time
      while (defusing)
      {
        keypad.getKey();
                percent = (millis() - xTime) / (ACTIVATESECONDS * 10);
                
        drawBar(percent);
        //check if game time runs out during the disabling
        aTime = millis() - iTime;
        Serial.println(millis()-xTime);
        if ((minutos - aTime / 60000 == 0 && 59 - ((aTime / 1000) % 60) == 0) || minutos - aTime / 60000 > 4000000000) {
          endGame = true;
        }
        timeCalcVar = (millis() - xTime) % 1000;

        if ( timeCalcVar >= 0 && timeCalcVar <= 40)
        {
          digitalWrite(REDLED, HIGH);
          if (soundEnable)tone(tonepin, alarmTone1, 200);
        }
        if (timeCalcVar >= 480 && timeCalcVar <= 520)
        {
          if (soundEnable)tone(tonepin, alarmTone2, 200);
          digitalWrite(REDLED, LOW);
        }



        if (percent >= 100)
        {
          digitalWrite(GREENLED, LOW);
          destroy();// jump to the next gamemode
        }
      }
      cls();
      digitalWrite(REDLED, LOW);

    }
  }
}

void destroy() {
  lcd.clear();
  lcd.setCursor(3, 0);
  lcd.print(BOMB_ARMED);
  delay(1000);
  int minutos = BOMBMINUTES - 1;
  unsigned long iTime = millis();
  unsigned long aTime;
  int largoTono = 50;

  //MAIN LOOP
  while (1) {

    //If you fail disarm.
    if (endGame) {
      explodeSplash();
    }

    //Led Blink

    timeCalcVar = (millis() - iTime) % 1000;
    if (timeCalcVar >= 0 && timeCalcVar <= 40)
    {
      digitalWrite(REDLED, HIGH);
      if (soundEnable)tone(tonepin, activeTone, largoTono);
    }
    if (timeCalcVar >= 180 && timeCalcVar <= 220) {
      digitalWrite(REDLED, LOW);
    }
    //Sound
    aTime = millis() - iTime;
    timeCalcVar = (millis() - iTime) % 1000;
    if (timeCalcVar >= 245 && timeCalcVar <= 255 && minutos - aTime / 60000 < 2 && soundEnable)tone(tonepin, activeTone, largoTono);
    if (timeCalcVar >= 495 && timeCalcVar <= 510 && minutos - aTime / 60000 < 4 && soundEnable)tone(tonepin, activeTone, largoTono);
    if (timeCalcVar >= 745 && timeCalcVar <= 760 && minutos - aTime / 60000 < 2 && soundEnable)tone(tonepin, activeTone, largoTono);
    if ( minutos - aTime / 60000 == 0 && 59 - ((aTime / 1000) % 60) < 10)largoTono = 300;

    lcd.setCursor(1, 0);
    lcd.print(DETONATION_IN);
    //Passed Time

    lcd.setCursor(3, 1);

    ////////HERE ARE THE TWO OPTIONS THAT ENDS THE GAME///////////

    ////TIME PASED AWAY AND THE BOMB EXPLODES
    if (minutos - aTime / 60000 == 0 && 59 - ((aTime / 1000) % 60) == 0) // Check if game ends
    {
      explodeSplash();
    }
    //print time

    printTime(minutos, aTime);

    //// SECOND OPTION: YOU PRESS DISARMING BUTTON

    //IF IS A PASSWORD GAME

    if ('d' == keypad.getKey() && passwordEnable) {

      lcd.clear();
      lcd.setCursor(1, 0);
      lcd.print(DISARMING);
      delay(1000);//a little delay to think in the password

      lcd.clear();
      lcd.setCursor(0, 0);
      lcd.print(ENTER_CODE);

      setCodeTime();// we need to set the compare variable first

      //then compare :D

      if (comparePassword()) {
        disarmedSplash();
      }
      lcd.clear();
      lcd.setCursor(3, 0);
      lcd.print(CODE_ERROR);
      if (soundEnable)tone(tonepin, errorTone, 200);
      delay(500);
      cls();
    }

    if (defusing && !passwordEnable) // disarming bomb
    {
      lcd.clear();
      digitalWrite(REDLED, LOW);
      lcd.setCursor(3, 0);
      lcd.print(DISARM);
      lcd.setCursor(0, 1);
      unsigned int percent = 0;
      unsigned long xTime = millis();
      while (defusing)
      {
        keypad.getKey();
        //check if game time runs out during the disabling
        aTime = millis() - iTime;
        if ((minutos - aTime / 60000 == 0 && 59 - ((aTime / 1000) % 60) == 0) || minutos - aTime / 60000 > 4000000000) {
          endGame = true;
        }
        timeCalcVar = (millis() - xTime) % 1000;
        if (timeCalcVar >= 0 && timeCalcVar <= 20)
        {
          digitalWrite(GREENLED, HIGH);
          if (soundEnable)tone(tonepin, alarmTone1, 200);
        }
        if (timeCalcVar  >= 480 && timeCalcVar <= 500)
        {
          if (soundEnable)tone(tonepin, alarmTone2, 200);
          digitalWrite(GREENLED, LOW);
        }
        unsigned long seconds = (millis() - xTime);
        percent = seconds / (ACTIVATESECONDS * 10);
        drawBar(percent);

        //BOMB DISARMED GAME OVER
        if (percent >= 100)disarmedSplash();
      }
      digitalWrite(REDLED, LOW);
      digitalWrite(GREENLED, LOW);
      cls();
    }
  }
}

Code part 9: (Name it “Splash”.)

void explodeSplash(){
  digitalWrite(REDLED, LOW);  
  digitalWrite(GREENLED, LOW); 
  cls();
  delay(100);
  endGame = false;
  lcd.setCursor(1,0);
  lcd.print("TERRORISTS WIN");
  lcd.setCursor(4,1);
  lcd.print("GAME OVER");
  for(int i = 200; i>0; i--)// this is the ultra hi definition explosion sound xD
  {
    tone(tonepin,i);
    delay(20);
  }
  noTone(tonepin);
  if(relayEnable){
    activateRelay(); 
  }
  delay(5000);
  cls();

  //end code
  lcd.print("Play Again?");
  lcd.setCursor(0,1);
  lcd.print("A : Yes B : No");
  while(1)
  {
    var = keypad.waitForKey();
    if(var == 'a' ){
      tone(tonepin,2400,30);
      //We have two options, search & destroy and sabotaje play again options so!
      if(sdStatus){
        startGameCount();
        search();
      }
      if(saStatus){
        saStatus=true;
        startGameCount();
        start=true; //to set iTime to actual millis() :D
        sabotage();
      }
    }  
    if(var == 'b' ){
      tone(tonepin,2400,30);
      menuPrincipal();

      break;
    }  
  } 
}
void failSplash(){
  digitalWrite(REDLED, LOW);  
  digitalWrite(GREENLED, LOW); 
  cls();
  delay(100);
  endGame = false;
  lcd.setCursor(1,0);
  lcd.print("  TIME OUT");
  lcd.setCursor(4,1);
  lcd.print("GAME OVER");
  for(int i = 200; i>0; i--)// this is the ultra hi definition explosion sound xD
  {
    tone(tonepin,i);
    delay(20);
  }
  noTone(tonepin);
  if(relayEnable){
    activateRelay(); 
  }
  delay(5000);
  cls();

  //end code
  lcd.print("Play Again?");
  lcd.setCursor(0,1);
  lcd.print("A : Yes B : No");
  while(1)
  {
    var = keypad.waitForKey();
    if(var == 'a' ){
      tone(tonepin,2400,30);
      //We have two options, search & destroy and sabotaje play again options so!
      if(sdStatus){
        startGameCount();
        search();
      }
      if(saStatus){
        saStatus=true;
        startGameCount();
        start=true; //to set iTime to actual millis() :D
        sabotage();
      }
    }  
    if(var == 'b' ){
      tone(tonepin,2400,30);
      menuPrincipal();

      break;
    }  
  } 
}
void disarmedSplash(){
  endGame = false;
  digitalWrite(REDLED, LOW); 
  digitalWrite(GREENLED, LOW);
  if(sdStatus || saStatus){
    lcd.clear();
    lcd.setCursor(2,0);
    lcd.print("BOMB DISARMED");
    lcd.setCursor(3,1);
    lcd.print("GOODS WIN");
    digitalWrite(GREENLED, HIGH);  
    delay(5000);
    digitalWrite(GREENLED, LOW); 
  }
  //end code
  lcd.clear();
  lcd.print("Play Again?");
  lcd.setCursor(0,1);
  lcd.print("A : Yes B : No");
  digitalWrite(REDLED, LOW);  
  digitalWrite(GREENLED, LOW); 
  while(1)
  {
    var = keypad.waitForKey();
    if(var == 'a' ){
      tone(tonepin,2400,30);
      //We have two options, search & destroy and sabotaje play again options so!
      if(sdStatus){
        startGameCount();
        search();
      }
      if(saStatus){
        saStatus=true;
        startGameCount();
        start=true; //to set iTime to actual millis() :D
        sabotage();
      }
    }  
    if(var == 'b' ){
      tone(tonepin,2400,30);
      menuPrincipal();
      break;
    }  
  } 
}

Code part 10: (Name it “Zutils”.)

void drawBar(byte porcent){
  //TODO: Optimize this code 
  int box=(8*porcent)/10;
  lcd.setCursor(0,1);
  while(box>=5){
    if(box>=5)
    {
      lcd.write(4);
      box-=5;
    }
  }
    switch(box){
    case 0:
      break;
    case 1:
      lcd.write((uint8_t)0);
      break;
    case 2:
      lcd.write(1);
      break;
    case 3:
      lcd.write(2);
      break;
    case 4:
      lcd.write(3);
      break;
    }
  

}
void cls(){
  lcd.clear();
  lcd.setCursor(0,0);
}

void printTime(unsigned long minutos, unsigned long aTiempo){

  timeCalcVar=minutos-aTiempo/60000;
  //Hours
  
  if(timeCalcVar/60==0 && refresh){
      lcd.clear();
      refresh=false;
      //delay(100);
      lcd.setCursor(3,1);
      Serial.println("!!!!");
  }
   
  if(timeCalcVar/60>=1){
    
    if(timeCalcVar/60<10)
  {
    lcd.setCursor(2,1);
    lcd.print("0");
    lcd.print(timeCalcVar/60);
  }
  else
  {
    lcd.print(timeCalcVar/60);
  }
  
  lcd.print(":");
  
  }
  //minutes
  if(timeCalcVar%60<10)
  {
    lcd.print("0");
    lcd.print(timeCalcVar%60);
  }
  else
  {
    lcd.print(timeCalcVar%60);
  }
  lcd.print(":");
  //seconds
  timeCalcVar=aTiempo/1000;
  if(59-(timeCalcVar%60)<10)
  {
    lcd.print("0");
    lcd.print(59-(timeCalcVar%60));
  }
  else
  {
    lcd.print(59-(timeCalcVar%60));
  }
  lcd.print(":");
  //this not mach with real time, is just a effect, it says 999 because millis%1000 sometimes give 0 LOL
  lcd.print(999-(millis()%1000));
}

void printTimeDom(unsigned long aTiempo, boolean showMillis){
  //minutes
  if((aTiempo/60000)<10)
  {
    lcd.print("0");
    lcd.print(aTiempo/60000);
  }
  else
  {
    lcd.print(aTiempo/60000);
  }
  lcd.print(":");
  //seconds
  if(((aTiempo/1000)%60)<10)
  {
    lcd.print("0");
    lcd.print((aTiempo/1000)%60);
  }
  else
  {
    lcd.print((aTiempo/1000)%60);
  }
  if(showMillis){
    lcd.print(":");
    //this not mach with real time, is just a effect, it says 999 because millis%1000 sometimes give 0 LOL
      lcd.print(999-millis()%1000);

  }
}

void startGameCount(){
  lcd.clear();
  lcd.setCursor(1,0);
  lcd.print("Ready to Begin");
  lcd.setCursor(0,1);
  lcd.print("Push ANY Button");
  keypad.waitForKey();//if you press a button game start

  cls();
  lcd.setCursor(1,0);
  lcd.print("Starting Game");
  for(int i = 5; i > 0 ; i--){ // START COUNT GAME INIT
    lcd.setCursor(5,1);
    tone(tonepin,2000,100);
    lcd.print("IN ");
    lcd.print(i);
    delay(1000);
  }
  cls();
}

void checkArrows(byte i,byte maxx ){

  if(i==0){
    lcd.setCursor(15,1);
    lcd.write(6); 
  }
  if(i==maxx){  
    lcd.setCursor(15,0);
    lcd.write(5);
  }
  if(i>0 && i<maxx){
    lcd.setCursor(15,1);
    lcd.write(6);
    lcd.setCursor(15,0);
    lcd.write(5);  
  }
}

void activateRelay(){

  digitalWrite(RELAYPIN, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(RELAY_TIME); 
  digitalWrite(RELAYPIN, LOW);

}

Good luck building your ARDUINO AIRSOFT TIME BOMB!

Danny van den Brande

http://www.arduinosensors.nl

Programmer, Game Designer, 3D Designer, Web Designer, Graphic Designer. Jup this website looks crappy.. :) But enjoy the projects! Everything you need is here.

2 thoughts on “ARDUINO AIRSOFT TIME BOMB GAME”

    1. Its in the codes, you can change language at the LANG code. The rest can be found in the menu code. Just read the code and try to understand the menu code and you will see what you want to do, you can add the second menu or totally change the menu options.

Leave a Reply to Danny van den Brande Cancel reply

Your email address will not be published. Required fields are marked *